| Customization: | Available |
|---|---|
| Type: | Drill |
| Application: | Orthopedic, Neurosurgery, Microsurgery |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Output power | 85w |
| Speed(r.p.m) | 0-630 |
| Oscillations (osc/min) | / |
| Torque(Nm) | 3.3 |
| Operation(V) voltage | 14.4V |
| Sterilization | 135°C |
| Swings (°) | / |
| Noise(db) | ≤40 |
| 1.Sterilize temperature ≤ 135 °C (Improved type ≤ 155 °C ),if the |
| temperature is over 135 ° C ,the motor will be damaged. |
| 2.Normal bone drill can only hold drill bits less than 6mm,acetabulum |
| reaming drill with big torque,rpm is around 300,canulate drill is used |
| with nail or K wire ,rpm is around 600. |
| 3.The battery need to be get out of the pwer tool after surgery. Otherwise |
| the small automatic discharge of the electric will make the life of the |
| battery short. |
| 4.The battery cannot be sterilized ,it is not autoclavable. |
| 5.The cranial bur must be washed right after the surgery by purger in |
| order to aviod the blood stick in the bur,then we should make it dry. |
| 6.The battery space in the handpiece of the tool should not have any |
| water,after sterilization. |
| 7.The cranial bur blade is made of medical stainless steel,in order to |
| avoid broken,so it is flexible and not very hard,it is easy to be attrite, |
| we suggest each blade only use for 1 surgery. |
About us
){kind=link}